Operating pressure
Vehicle height of
Working height
Dockboy Applications
- For ship hull bottoms and all kinds of rounded surfaces
- Superstructures up to a height of 6,05 m (can be optionally expanded to 13 m) are possible
- Can be used on ship decks, car decks, cargo decks and other flat floor surfaces
- Extremely low vehicle height (only 1,26 m) – lower than most keel blocks
The DOCKBOY is equipped with the AQUABLAST Plus system
In combination with the direct, integrated Aquablast Plus vacuum system, the Dockboy ensures environmentally friendly derusting, plus the removal of old surface coatings and accumulated waste and wastewater.
- The specially developed nozzle layout ensures that the high-pressure water is distributed evenly across the entire working width
- Hydraulic drive for constant speeds, infinitely variable from 100 to 2500 rpm
- Oil and water kept completely separate – contamination of the hydraulic oil as a result of significant pressure losses not possible
- Cleaning and vacuuming integrated in a single system
Data Sheet
Max. operating pressure: |
3000 bar | |
Recommended flow rate: |
up to 47 l/min. | |
Min. vehicle height: |
1,26 m | |
Vehicle width: |
1,48 m | |
Jib (Working height): |
up to 6,05 m | up to 13 m |
Vehicle length: |
6,30 m | 6,50 m |
Weight: |
~ 5,0 t | ~ 5,2 t |
Swivel radius: |
4,60 m | 5,00 m |
Recommended high-pressure units
(depending on the Aquablast® Plus surface cleaners)
HDP 200 |
28 l/min | 3000 bar |
HDP 200 |
40 l/min | 2800 bar |
HDP 300 |
47 l/min | 3000 bar |
Working width
274 mm (optional)
Working parameters
28 – 47 l/min
2800 – 3000 bar
Working width
374 mm (optional)
Working parameters
28 – 47 l/min
2800 – 3000 bar
Working width
520 mm (optional)
Working parameters
47 l/min
2800 – 3000 bar
Get in Touch...
If you would like to find out more, get a quote, or just some advice, contact Hydroblast directly.